Perfect Orange Opaque PETG PRO AMS Compatible

Prints great - love the deep orange color

Prints very well - I've got a Prusa MK3S+ with a mosquito hot end. Printing with the recommended settings for the hot end (0.4 mm retraction, 0.95 extrusion multiplier) at 240C for the first layer and 235 thereafter. All the atomic filament I've bought has been dry and printed great out of the box.

Incredible PETG

This PETG is excellent stuff. Prints well across all colors without any noticeable difference in print performance from one color to another. By far and away my preferred PETG filament. Stringing and oozing are kept to a minimum at 250, but I print at 265 and accept the light stringing and oozing in return for better layer adhesion. A quick pass with a heat gun is all it takes to knock out the strings I do get. As with any PETG, it’s good practice to dry the roll out in a dehydrator or filament dryer before keeping it in a dry box before printing to get the least possible amount of stringing and oozing. This orange is a nice departure from other oranges on the market in being a very muted, true orange rather than a high-visibility orange. I think that is best for the orange in the "Perfect" lineup.

Prints better using the Prusament PETG preset

Used it with my Original Prusa MK4. I first used the bed and nozzle temps recommended above. The print had adhesion problems and some spaghetti - very bad. I then tried it with the Prusament PETG profile in Prusaslicer and it printed flawlessly.