1/2" Aluminum Front Lift Kit Spacers - Fits 2002-2007 Subaru WRX & STI

Should be made of aluminum

Install was relatively easy. Did not need to disassemble the strut, just used a ball joint tool to pop the old studs out. However, I've had to re-torque the top mounting nuts to 23 ft-lbs several times as the plastic material seems to compress and loosen the hardware to about 10 ft-lbs.

These spacers do increase height by 1/2"

As advertised they increase the height 1/2". Installation is fairly straight forward and not too complicated. The only problem is being able to hold the bolt whilst tightening the nut. On one of the 3 bolts needed to mount the strut hat I needed to use a 6mm stubby hex to hold the bolt while tightening the nut and It was very difficult to make this happen. Customer support stated that the spacers had nuts recessed up in 'em, nah they did not

Good quality

The spacers are good. Taking apart the strut assembly is a real pain to install them. I have not installed them because my strut mount was loose after re-assembly.