Light Kit for The Batman - Batmobile 42127

Straightforward to install, very effective lighting!

I bought the remote lighting set for the 42127 Technic Batmobile. This was added after full assembly of the Lego set. While the instructions were relatively clear, some of the lights were a bit fiddly to install, but blunt nose tweezers and an optivisor made the job pretty easy. No major disassembly was required, and the wiring was will hidden inside and beneath the structure. Be aware, if you fit the lighting in the rotating rear jet nozzle, you will need to disconnect the rotational gear and it will no longer work as intended. Highly recommend this set, the remote option adds different lighting effects and combinations which are really effective. Lifts the whole appearances of this somewhat skeletal Technic model to a completely new level.

The Batman would approve

At age 58 I decided to explore Lego products for the first time and decided to build The Batman Batmobile. After hours if not days of research online looking for the best Lego lighting system I decided on Game of Bricks. This decision was based on reviews, price and the option of a remote device to control the lighting system. There aren't a lot of reviews on the remote option offered by Game of Bricks, so I wanted to point out how well this system works. This particular vehicle screams for all extra light options at your disposal and I highly recommend spending the extra cost on the remote. If building and lighting with a younger child, I'd recommend going all out on the remote with sound effects. I received my lighting system half way through my build and took advantage of installing all the front lights and the rear tail lights as I continued the build. When installing the front headlight strips, I found it wasn't easy to snap the clear blocks back into place over the wires, but this wasn't necessary and does not effect how the headlights look or light up. Better not to force these down and cut through the wires. Knowing ahead of time I didn't want the interior on full bright lighted display, I started with Step 2 and I then later decided to light the rear engine compartment with the Step 1 interior strip (it's the brightest one). I wasn't going to be manually using the red Lego brick control on the top "Hand of God" to light the engine, so it made perfect sense to use this interior light strip under the engine cowling. (would be fun to see that light strip in red). In addition, I may relocate the three ground effects lights to illuminate the front under hood compartment and the interior in a more discrete way. You need to know that if you want to light up the rear "Blue Flames" you'll need to disconnect the drive train wheel that turns the engine pistons, due to the wires defeating the spinning action. Don't let all the small wiring and connections intimated you, take your time, treat everything carefully and you'll be so pleased with the results. Shipping was faster than I excepted and customer service reached out within days to make sure all was satisfactory. Thanks Game of Bricks!

The Batman - Batmobile "Classic"

Great kit, I personally didn't like the front grill and cockpit lights so i left them out and its perfect. (The only thing is the front flames attachments could be better designed ). If you have more classic light kits and want to control the intensity of the lights on them at the same time just get a USB HUB and a USB controller kit and you can control all kits at the same time :D Just Beware that sense its a fixed bandwidth controller it might interfere with other remote kits.