FlowTech™ Hotend for Bambu Lab X1 and P1 Printers

Started off great... now problematic

I follow the directions and watched tons of videos on installing and taking care of the MicroSwiss FlowTech™ Hotend for Bambu Lab X1 and P1 Printers. I used the .6mm nozzle for some Bambu Wood PLA and it worked great, then I switched to the .4mm nozzle for regular and silk PLA for my other builds. Initially it worked great but then it clogged up, and now the .4mm nozzle has fuzed to the main body of the hotend and is no longer interchangeable. It's a great product, I just hope that this isn't the normal status.

Good concept, but product falls flat

I'll start off by saying I didn't have gigantic issues...until recently. Cold change procedure was easy and smooth, I just found I didn't really swap nozzle sizes much. I also could NOT for the life of me get the .8 nozzle calibrated in Bambu Studio. Second huge problem was heat creep. Never had issues with the BL Hardened .4 nozzle, this thing has gigantic heat creep issues, especially on long multi color prints. Finally, I had a small blob form that got a bit above the silicone sock. Heated the nozzle up and cleaned as much as I could, and was completely unable to remove the nozzle from the hotend assembly. After more cleaning and trying again, the nozzle straight snapped off. Pretty disappointed.

Never worked

Clogged on first use, never worked once. Save your money.