FLOORING TONGUE & GROOVE SHAPER CUTTERS

T&G Flooring cutter

Used with 3/4 white ash on a 1HP shaper and it handled it very well. Nice clean cuts.

Tongue and Groove Flooring shaper cutters are full featured

Great. Like the relief at bottom of the joint and the shortening of the tongue to avoid bottoming. Sharp cutters, nice fit of tongue to groove, no adjustments to spindle height switching from groover to tongue. One minor cavil: because the bottom of the tongue cut is a different diameter from spindle center from the diameter of the groove cutter, it is necessary to change your fence setting (I used a back fence setup). Some technical numbers on the offset would have been useful instruction or perhaps the cutters could be sized to eliminate this procedure.

Clever design

This is a very cleverly designed cutter which turns out a more desirable result than the cutter which it replaced.