Murrays Sports RONSTAN WAVE MAINSHEET BASE BLOCK - Shop

You might also like

Eyestrap Wave Bridle
Murrays Part# 50-38120011
Hobie® factory replacement eyestrap for Hobie Wave bridle.

Murrays Sports

WAVE BRIDLE EYESTRAP

Hobie Wave Spinnaker

Murrays Part# 50-38999052

Spinnaker sail for the Hobie Wave. Colors vary. This is the sail only.

Hobie Part# 38999052

Murrays Sports

WAVE SPINNAKER

Murrays Sports

GETAWAY JIB - TURQUOISE

Hobie Wave Hull Seal Cap

Murrays Part# 50-38370001

Hobie® factory replacement hull seal for under the seat pad on Wave.

Hobie Part# 38370001

Murrays Sports

WAVE HULL SEAL CAP

Mast Ball H17 Wave
Murrays Part# 50-50212301
Hobie factory replacement mast ball for Hobie® 17 and Wave. Ball measures 1-1/2" diameter with a 9/16"-18 threaded hole. This ball can also be glued for use on Trac 16.

Murrays Sports

H-17/WAVE MAST BALL

Hobie EZ Lock Rudder retainer clip

Murrays Part# 50-90880231

Retainer clip for Hobie Bravo EZ Loc Rudder Housing.

Hobie Part# 90880231

Murrays Sports

HOBIE EZ LOCK RUDDER CLIP

Hobie 378 Replacement vane for Telo-Cat™ and Black Max is constructed of tough, high-impact plastic vane with visible trim markings.

Murrays Sports

TELO-CAT REPLACEMENT VANE - DISCONTINUED

Getaway Mast Base Casting

Murrays Part# 50-37641001

Hobie® factory replacement mast base casting for Getaway. Use four #19-5032 stainless rivets and four #19-5020 casings for installation.

Murrays Sports

GETAWAY MAST BASE CASTING

Wave Trampoline Tension Wire

Murrays Part# 50-38970051

This is the wire that goes through the side of a Hobie Wave Classic trampoline and hooks into the hooks on the hulls to tension the tramp.

Murrays Sports

WAVE TRAMPOLINE TENSION WIRE

Hobie Sol Cat 18 Trapeze Wires
(2 Handles)

Trapeze Wire set for single trapeze.

Use this page to order product numbers:

002-6253-01
002-6253-02

Murrays Sports

DART 18 TRAPEZE BLACK WIRES (2)

Hobie 20-style factory tiller connector post. Part of the Hobie 1953 tiller connection system. Hobie part number 40530000 and 40530001

Murrays Sports

H-20 TILLER CONNECTOR POST

Hobie Hull Cradle Bracket

Murrays Part# 50-48020001

Sold individually

Murrays Sports

HOBIE HULL CRADLE BRACKET

Murrays Sports

FCS Fin Removal tool

Leech Cap Adjustable Main Prindle
Murrays Part# 012-6003-1
No more knots at the trailing edge. These Perfect Pocket leech batten caps adjust sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life.Tren Tec adjustable batten caps for Prindle catamaran mainsails. Leech caps are used on the trailing edge of the sail.
Sold individually

Murrays Sports

PRINDLE 16 MAIN ADJUSTABLE LEECH CAP

Hobie® factory replacement part for Hobie 20-style tiller connector and adjuster kit (#07-1953). Hobie part number 40550001. Murrays.com - In stock

Murrays Sports

HOBIE THREADED TILLER CONNECTOR END CAP 1953

Wave Trapeze Wire BK (2)

The basic trapeze assembly is constructed to factory specifications and includes two coated trapeze wires 3/32" (1x19) with nylon handles and a thimble at each end. Wires end just below handles. Order shock cord and adjustment kits separately.

A trapeze adjustment kit (#01-1121 or 01-1140, purchased separately) may be added to wire with no installation charge! Check box when ordering and wire length will be adjusted accordingly.

Murrays Sports

WAVE TRAPEZE BLACK WIRE (2)

Hobie Wave rigging kit, 2 shrouds, 2 bridles and a forestay

Murrays Sports

H WAVE RIGGING KIT

EZ LOC UP-LOCK PIN KIT

Murrays PN 50-50314001

The EZ LOC UP-LOCK PIN KIT is the pin for locking Hobie Cat EZ Loc rudder system in up position during storage. EZ Loc up-lock pin kit is the pin, screw, split rings and lanyard for securing the EZ Loc rudder in the up position.

Hobie Part Number 50314001

Murrays Sports

HOBIE EZ LOC UP LOCK PIN KIT

Wave Mainsheet S Hook

Murrays Part# 50-38900031

Hobie® factory replacement S-hook for Wave mainsheet. Mainsheet is 35 feet of Dacron® spun braid #39-055. Makes it easy to attach mainsheet to sail and standard on all new boats.

Hobie Part# 38900031

Murrays Sports

WAVE MAINSTEET S HOOK

Downhaul Kit 3:1 Wave

Murrays Part# 001-2029

This is a HCA and Formula Wave Class Legal downhaul kit. The Hobie Wave is a simple boat, and this simple kit helps make downhaul adjustments quick and easy. Installs in minutes with a Philips head screw driver.

This can also be an intermediate downhaul kit for the H16 for recreational use, it's not class legal for HCA racing.

Murrays Sports

WAVE DOWNHAUL KIT 3:1

Hobie Formula Wave Class GP sail

Murrays Sports

FWC GP Event Sail

Alpha SSR 8mm Racing Sheet - main sheet

Murrays Sports

5/16" SSR RACING SHEET 8MM

F4 Foils

4.9

(29)

Getaway Main Halyard

Murrays Part# 002-0973-60

The Murrays Hobie Getaway main halyard for is constructed to the current factory specs. It has a long rope section and a shorter wire section with a stopper and halyard shackle. The rope section is easy on the hands and prevents electrical current from traveling down the mast in the event of an electrical wire contact.
Compare to Hobie part number 37651001

Murrays Sports

GETAWAY MAIN HALYARD

The Staymaster Turnbuckle - No more hit-and-miss wire tensioning! Shorten your diamond wires and use an adjustable tension mechanism to easily repeat tension settings

Murrays Sports

STAYMASTER TURNBUCKLE 1/8

Mast Ball H20/21/Getaway

Hobie part number 30110001

Hobie factory replacement mast ball for Hobie 20, Hobie 21 and Hobie Getaway. Ball measures 1-1/2" diameter with a 5/8" hole.

Murrays Sports

H-20/21/GETAWAY MAST BALL

(1)

H-16 UPPER FORESTAY 5/32 BARE

Murrays PN 002-0235-00

Upper forestay for The Hobie® 16 is constructed of 7x19 - 5/32" bare wire to factory specifications. Compare to Hobie Cat® #20810011.

This part is used as part of the classic halyard/ forestay configuration and it holds the stainless pulley that the jib halyard cable attaches to.

This will also work to hold your Aussie halyard block assembly.

Murrays Sports

H-16 UPPER FORESTAY 5/32" BARE WIRE

(1)

The Mystic Surf Clickerbar 4.0 features a surf style sliding rope connection. The bar is equipped with the well known clicker system that offers a strong and solid connection.

The Surf Clicker bar does not have the wings like the Stealth bars, meaning it may slide up a little more, but the rope does not rotate the bar upwards like fixed hooks do. And without the wings it works on pretty much any harness available today. The Surf Clickerbar is compatible with all Mystic and Dakine Harnesses.

30% off

Murrays Sports

MYSTIC SURF CLICKERBAR 4.0

Getaway Forward Trampoline 2001-2016

Murrays Part# 50-37980055

Murrays Sports

GETAWAY FORWARD TRAMPOLINE 2001-2016

Shock Cord Dyneema Cover 4mm - White

Murrays Part# 39-7391D

Robline 4mm Dyneema coated bungee.

Robline part number DSC-4W

Murrays Sports

DYNEEMA SHOCK CORD 3MM

saltcitysailing

5

(16)

SUPER GOOSE H-17/18/20/21
This upgraded gooseneck by Tren Tec is constructed from a solid block of 6061-T6 aluminum and then finished with a coat of black hardkote anodizing.

The Super Goose is for Hobie® 17 (newer), 18, 20 and 21; not compatible with older Hobie® 17 model.

Hobie part number 1510

Murrays Sports

H-17/18/20/21 SUPER GOOSE

Murrays Sports

WAVE LINE PACKAGE

HOBIE GETAWAY RIGGING KIT

Complete standing rigging package for the Hobie Getaway.  If you need the swivel above the forestay as well it is linked below with the shackle that attaches it.

Kit includes:

Main Halyard

Forestay

2 x Shrouds (Side Stays)

2 x Bridles

Hobie part numbers 37651001, 37790001, 37810021, 37822011

Murrays Sports

GETAWAY RIGGING KIT

Mainsheet for a Hobie Wave sailboat made of Dacron Spun Braid. Dacron Spun Braid was the OEM sheeting line for Hobie up into the late 90s. Dacron Spun Braid has excellent grip, cleats well and is easy on the hands.

35' of 3/8 Soft Dacron Spun Braid with a strong polyester blend core.

This was the stock Hobie mainsheet line from the 80s and 90s. Very little stretch, soft hand, easy cleating.

Murrays Sports

H WAVE MAINSHEET

The Hobie Wave Forestay Adjuster w/ Toggle
Murrays PN 001-2085
The Murrays Wave Forestay Adjuster with Toggle is a must have for speeding up the rigging process on your Hobie Wave. This adjuster includes a toggle pin with lanyard that can't fall off of your bridle assembly. This allows you to easily raise and pin the mast single handed! The toggle is affixed around the center of the adjuster with a slightly longer lanyard to keep it out of the way of your bridle vane or other accessories.

Murrays Sports

WAVE FORESTAY ADJUSTER W/ TOGGLE PIN

Hobie Gooseneck Hinge Vertex

Murrays Part# 50-50772031
Hobie® factory replacement gooseneck vertex for all Hobie® Cats.

Hobie Part# 50772031

Murrays Sports

HOBIE GOOSENECK HINGE VERTEX

Hobie Wave Mast Step Post (Threaded)

Murrays Part# 50-38170001

This part is used on the Hobie Wave to connect the mast ball to the mast step casting on the front crossbar. The older waves utilize an H14 mast step casting.

Hobie Part# 38170001

Murrays Sports

WAVE MAST STEP POST (THREADED)

Ronstan S-Hook, 8mm (5/16")

Murrays Part# 21-0049

The Ronstan 8mm S-Hook features a closed eye and long return leg to ensure a positive attachment and avoid accidental release.

316 Stainless Steel, 8mm diameter bar

Ronstan Part# RF49

Murrays Sports

RONSTAN S HOOK, 8MM (5/16")

EZ Lock Lower Pintle

Murrays Part# 50-90880221

Hobie® factory replacement lower pintle for EZ Loc rudder system.

Fits Hobie Bravo, wave and Getaway boats

Hobie Part# 90880221

Murrays Sports

BRAVO/WAVE/GETAWAY EZ LOC LOWER PINTLE

Wave Club Traveler Kit

Murrays Part# 50-39250000

The Hobie Wave Main Traveler Kit is the Hobie factory main traveler kit for Club Wave includes track, Ronstan cleat, traveler car, mounting plate and rivets.

Murrays Sports

WAVE CLUB TRAVELER KIT

Hobie Aussie Halyard Ring

Murrays Part# 007-3064

If you're having trouble raising or lowering your mainsail due to a faulty halyard ring and shackle, this upgrade will help. Welded ring and lanyard give you more positive control while hooking or unhooking the ring to the hook. Use on any boat that uses a hook at the mast head and a ring and shackle at the head of the sail. Personal preference dictates whether you choose this ring or the Murrays Aussie Ring (#01-4216).

Hobie® Part# 3064

Murrays Sports

HOBIE AUSSIE HALYARD RING

Wire 5/32" 1X19 Bare 316 Stainless Steel
316 stainless steel cable is the gold standard for marine rigging applications due to its high strength and corrosion resistance. 1x19 cable is rigid, resists kinking, and has an extremely high load bearing capacity. Ideal for manufacturing long lasting bridals, shrouds and stays.
Features
316 Stainless Steel
Stiff and Low Stretch
Highly Polished for Marine Use
One Strand Consisting of 19 Wires
Sold by the foot

Murrays Sports

WIRE 5/32" 1X19 BARE 316 SS

Murrays Sports

5/16" SSR LIGHT RACING SHEET 8MM

Ronstan shock block Part # RF8080 5mm

Murrays Sports

RONSTAN SMALL SHOCK 3/16"

Hobie Wave Mainsail-White

Murrays Part# 50-38991000

Description:

White mainsail for the Hobie Wave. A great alternative for those looking for a basic sail without colored panels.

Murrays Sports

WAVE MAINSAIL (WHITE)

Ronstan Plastic Drain Plug with Chrome Brass Housing, 15/16" Hole

Murrays Part# 21-0737

This lightweight and inexpensive plug features a molded recess in the base that traps sealant (sold separately) in place, providing a more watertight seal. Nylon plug is UV-stabilized. Retaining legs keep drain plug from falling out of hole when unscrewed. Includes chromed brass housing (body) and gasket.

Murrays Sports

RONSTAN PLASTIC DRAIN PLUG WITH CHROME BRASS HOUSING, 15/16" HOLE

WAVE BATTEN CAPS

Tren Tech main sail batten cap kit for the Hobie Wave. 

Includes 3 large batten caps, 2 small batten caps and batten tie line.

Murrays Sports

WAVE BATTEN CAPS

Sailsport Marine

5

(23)

FSE Robline Orion

FSE Robline Orion

FSE Robline 8 Plait

FSE Robline Dinghy Sheet XL

FSE Robline Ocean 3000

Getaway Main Lacing Rod 64-3/4"

Murrays Part# 50-37880011

This is the lacing rod that is used to tension the main trampoline on the Hobie Getaway.

Hobie Part# 37880011

Murrays Sports

GETAWAY MAIN LACING ROD 64-3/4"

Getaway Forward Trampoline Lacing Rod- 68"

Murrays Part# 50-37880001

Trampoline lacing rod for the front of the Hobie Getaway trampoline.

Hobie Part# 37880001

Murrays Sports

GETAWAY FORWARD TRAMPOLINE LACING ROD 68"

Hobie 16 Aussie jib halyard kit

Murrays Sports

H16 AUSSIE JIB HALYARD KIT

Hobie Wave Lower Pintle

Murrays Part# 50-38101401
Hobie® factory replacement lower pintle for Wave or Bravo or Getaway Pre-EZ Loc Rudder Systems. Lower pintle assembly for Hobie Wave sailboat.

Original Equipment on all Hobie Wave sailboats.
Lower pintle should be mounted with four (4) screws.
Use Part # 8030171 for boats 2008 and older, or Part # 8030331 for 2009 and newer.

Hobie Cat Part # 38101401

Murrays Sports

WAVE WAVE/GETAWAY LOWER PINTLE - PRE EZ LOC

Hobie Getaway Tiller Connector Screw

Murrays Part# 50-40530021

Hobie® factory replacement tiller connector screw for Club Wave.

Hobie Part# 40530021

Murrays Sports

GETAWAY TILLER CONNECTOR SCREW

Ronstan Swiveling Fairlead & Cam Cleat for 3-12mm Rope

Murrays Part# 21-0058

Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. Swivel cleat bases permit easy cleating and releasing from any angle. Dead eyes contain stainless steel liners for low friction and long life. Cleating plates are heavy gauge alloy for stiffness and minimum distortion under load.

Cam cleats and fairleads should be selected on the basis of need. Order plastic base pads with fasteners

Murrays Sports

RONSTAN LARGE SWIVEL CLEAT WITH FASTRACK

Screw 1/4-20 x 5/8 PHMS-P Stainless Steel
Murrays Part# 50-8030331
This screw is used on the Hobie wave to secure the eye straps to the inner edge of the crossbars for connecting the tramp pulleys on the classic wave or "other" on the club version.

Murrays Sports

SCREW 1/4-20 x 5/8" PHMS-P SS

Hobie 1953 tiller connection kit - new style

Murrays Sports

HOBIE TILLER CONNECTOR KIT

(1)

H18/20 Gooseneck Yoke

Murrays Part# 50-60710000

Hobie® factory replacement gooseneck yoke for Hobie 18 and 20.

Hobie Part# 60710000

Murrays Sports

H-18/20 GOOSENECK YOKE

Rudder Cam Screws H17, H18, H20,
Older Wave and Getaway
Murrays Part# 001-3551
The Murrays Rudder Cam Pins are a pair of sister screws for use on the Hobie 17, 18, 20, 21, as well as the older Hobie Wave and Getaway rudder cams. These pins are an upgrade form the original stock hollow flare rivet that came on the Hobie. The Sister Screws are much easier to install and remove, and they are reusable.
Compare to Hobie Cat® #5203 and #50312301.
Sold in pairs

Murrays Sports

H-17/18/20/OLDER WAVE AND GETAWAY RUDDER CAM PINS

Murrays Sports

WIRE 3/32" 1X19 WHITE COATED

Replacement up-loc pin for Hobie EZ LOC rudders. Add the plastic Hobie lanyard, or just use some batten tie line to secure it to the EZ LOC rudder housing. Used on both the Hobie Wave and Hobie Getaway.
Compare to Hobie part 50314001

Murrays Sports

EZ LOC UP-LOCK PIN

Murrays Hobie 18SX line package contains all the lines on a Hobie 18SX. The pack utilizes Robline Neptune 500 for the main and jib sheets and Pelican VLS, Very Low Stretch, for the control lines.  The Hobie 18 SX has wings that extend fore and aft of the front and rear crossbars and a taller mast, 29'7".

Main Sheet

Jib Sheet

Daggerboard Handles

Outhaul

Downhaul

Mast Rotation

Main Halyard

Trampoline Lacing Lines

Trapeze Adjustment Line

Batten Ties

Roller Furline line

Jib Halyard

Jib L

Murrays Sports

H-18SX LINE PACKAGE

Hobie Pre EZ Loc Upper Pintle

Murrays Part# 50-38101301

Replacement upper pintle assembly for Hobie Wave and Hobie Getaway sailboats using the pre EZ loc style rudder assembly.

Original Equipment on Hobie Wave and Hobie Getaway sailboats
Upper pintle should be mounted with two (2) screws
Use Part# 8030171 for boats 2008 and older, or Part# 8030331 for 2009 and newer

If you have an EZ Loc style assembly, use the Hobie EZ loc upper pintle part# 90880211

Hobie Cat Part # 38101301

Murrays Sports

HOBIE WAVE/GETAWAY UPPER PINTLE - PRE EZ LOC

Murrays Sports

GETAWAY MASTHEAD ASSEMBLY

Getaway Wing Mesh Trampoline-Turquoise

Murrays Part# 50-37971058

Murrays Sports

GETAWAY WING MESH TRAMPOLINE-TURQUOISE

H-18 Surefoot EVA Deck Grip Kit - Peel and Stick

The Hobie 18 Surefoot EVA Deck Grip Kit features 3m peel and stick backing on cut-diamond-textured EVA foam. Ideal rail and or deck grip on all dinghies and catamarans. EVA traction pads offer grip, padding and a long life span.  EVA is a lightweight foam doesn't absorb water the way carpet does, so there is minimal weight when it gets wet and it dries quickly!

Hobie 18 kit includes four 3" x 40" strips and four 3" x 20" strips - covers the side rails

Murrays Sports

H-18 SUREFOOT EVA Deck PEEL AND STICK GRIP KIT

H14 Mast Spinnaker Tang

Murrays Part# 50-10690000

Hobie® factory replacement spinnaker tang or mast tang for Hobie 14 or Wave. Use six 6-4 rivets (#19-5031) and six 6-4 casings (#19-5020) for installation.

Murrays Sports

HOBIE 14/WAVE MAST TANG

21% off

Murrays Sports

MYSTIC 5.0 CLICKERBAR

The Murrays Hobie Getaway line package contrains all the lines on a Hobie Getaway. The Main and Jib sheets are Robline Neptune 500 and the control lines are Pelican VLS, Very Low Stretch.

Murrays Sports

H-GETAWAY LINE PACKAGE

H16 Forward Crossbar with Mast Step

Murrays Part# 50-25131910

This is the current production front Crossbar for a Hobie 16. It includes the integrated traveler track and the updated mast step. Hobie® factory replacement forward crossbar for 1994 or later Hobie 16's with integrated track.

Hobie Part# 25131910

Murrays Sports

H-16 FROWARD CROSSBAR WITH MAST STEP

H16 and Sol Cat Jib Hank

Hobie part number 22090001

Hobie factory jib hank attaches the jib to the forestay of a Hobie 16 or Sol Cat

Murrays Sports

H-16/SOL CAT JIB HANK

Drift

Drift

Drift

4.2

(335.5K)

Screw H20 Connector 10-24 X .25"

Murrays Part# 50-8032401

Hobie® factory replacement screw for Hobie 20 tiller connector. Stainless steel 10-24 x 1/4" pan-head machine screw with Phillips head.

Hobie Part# 8032401

Murrays Sports

H-20 CONNECTOR SCREW 10X24X.25"

Radio Shoulder Harness

Murrays Part# 011-0101

The Radio Shoulder Harness conveniently and securely holds a variety of VHF radio sizes. If your radio is not waterproof, add an Aquapac waterproof case for use in and around water. This harness is ideal for rescue services personnel! Ideal for marine environments, PWC, and sailors.

Murrays Sports

RADIO SHOULDER HARNESS

The super comfortable, compact design of the Rooster Diamond Overhead Buoyancy Vest features a high cut waist to allow unrestricted movement and easy access to a trapeze hook. The highly adjustable shoulder and waist straps ensures a great fit for different body shapes, while the recessed, neoprene-covered buckles removes the risk of snagging on ropes and rigging. Strong, rip-stop fabric ensures longevity and provides greater wear resistance with reflective panels for improved visibility. The front pocket i

Murrays Sports

ROOSTER DIAMOND BUOYANCY VEST

Hobie Tendon Kit (Pre EZ Loc)

Murrays Part# 50-37561011

This tendon kit is the replacement for tendons used on the Hobie Wave, Hobie Getaway, and Hobie Bravo with the first generation EZ Loc rudders. This upgraded version is a notable improvement over the original tendons.

Hobie Part# 37561011

Murrays Sports

HOBIE TILLER TENDON KIT (PRE EZ LOC)

Harken Swivel with Carbo Cam Bullseye

Murrays Part# 25-3010

Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. Cam cleats and fairleads should be selected on the basis of need. Order plastic base pads and flat head screws separately to mount to your front crossbar.

Murrays Sports

HEAVY DUTY SWIVEL WITH CARBO CAM & BULLSEYE

Wave Forestay 1/8" Black
Murrays Part# 002-0844-02
One black forestay for Hobie® Wave is constructed to factory specifications. Compare to Hobie Cat® #39810001.

Murrays Sports

WAVE FORESTAY 1/8" BLACK WIRE

Ronstan Eye & Eye Swivel

Murrays Part# 21-0078

This ball bearing swivel by Ronstan has lower friction and higher working loads than non-ball bearing versions. It is used in conjunction with blocks and rigging systems to provide articulation and rotation. Not suitable for high-speed rotating applications.

Murrays Sports

RONSTAN ROLLER FURLING SWIVEL (EYE/EYE)

Murrays Sports

EYE STRAP KIT - 2072

Wave Shroud 1/8" Black Wire

Murrays Part# 002-0804-02

Single black shroud (sidestay) for Hobie® Wave is constructed to factory specifications.

Compare to Hobie Part# 39790001

Murrays Sports

WAVE SHROUD 1/8" BLACK WIRE

Murrays Sports

WAVE MAST ASSEMBLY (2 PIECE)

Ronstan Ferrule Eye 8mm Clearance

Murrays Part# 21-0499

Ronstan's grade 316 grade stainless steel eyestrap has a ferrule that guides line and provides a nice lead from any angle. Weighs 0.1 oz.

Measurements:

A = 3/8" ferrule eye diameter
B = 3/16" width
C = 1-1/8" distance between holes center-to-center
D = 5/32" hole diameter

Ronstan Part# RF499

Murrays Sports

RONSTAN EYESTRAP WITH FERRULE EYE

Rivet 3/16 x 5/16 Aluminum
Murrays Part# 50-8010071
Hobie® factory aluminum 3/16" x 5/16" rivet. A rivet tool is required for installation.

Murrays Sports

RIVET 3/16X 5/16 ALUMINUM

EZ Lock Upper Pintle

Murrays Part# 50-90880211

Hobie® factory replacement upper pintle for EZ Loc rudder system.

Fits Hobie Bravo and Getaway boats

Hobie Part# 90880211

Murrays Sports

BRAVO/WAVE/GETAWAY EZ LOC UPPER PINTLE

Murrays Sports

TRACKER HINGE PIN

The Mystic Clickerbar 5.0 features a traditional stainless steel kite hook that is designed for (unhooked) freestyle and freeride users. The bar is equipped with the well known clicker system that offers a strong and solid connection.

21% off

Murrays Sports

MYSTIC CLICKERBAR 5.0 SPREADERBAR

Trimstar Control Line 4mm Yellow
Trimstar Control Line 4mm Yellow

Trimstar Control Line 4mm Yellow

Double braid: Braided 16 strand HT Polyester core, HT Polyester cover.

Trimstar Control Line is a durable control line with good grip.

Ideal for halyards, downhaul, outhaul and cunningham

Murrays Sports

TRIMSTAR CONTROL LINE 4MM

TILLER ARM SWIVEL END CAP Hobie factory tiller arm swivel end cap for Hobie 20 Miracle rudder system 1953. Hobie part number 40650001

Murrays Sports

TILLER ARM END CAP SWIVEL

Murrays Sports

WAVE MAST BASE new S/N 1438 UP