Maxx12 Honey Extractor - 12 Frame Radial

Arrived in great condition. One notable omission was lack of a manual. While its easy to put together, would have liked to have seen a written warranty or guarantee as well as a parts list in case of issues down the road. Is there not any paperwork included?

I give it a 4

I like this slinger size, set-up and motor control and have hope they will last heartily. The cage and drain gate were delivered with very sharp edges and I have about 6 minor cuts from the stamped out metal, to date. I used a hand sander and sanded the sharp edges on the cage and now need to do the gate. I am hoping this will alleviate all the Band-Aids I've gotten. Also the cage manufacturer should grind off these sharp edges prior to delivery in the future, its like a Chinese wash machine frame.

Advice for Extracting Large Frames...

Just completed our second extraction with the new Maxx12. For medium frames, it is a dream and I can't say enough about the spring feet. They handled the slight imbalance of some partially filled frames flawlessly. Trying to spin large frames was a little trickier, however. As listed, it spins three large frames tangentially. Each time during our first two attempts, the force of extraction pulled the foundation out of the frame, stopping/slowing the motor and turning the frame into an unextractable mess. Eventually, we realized that you don't have to spin them as fast as those extracted radially. Start on 50rpm just to make sure everything is seated, then ramp up to about 150-160 fairly quickly to get through the "shaky zone." Don't exceed 175 rpm MAX and you should be just fine. If it's still a little out of balance, go ahead and flip them to relieve pressure on the back side and then return to extract the fronts after that side is completed. We haven't had any issues since adopting this procedure. It makes extracting large frames MUCH slower than the mediums, but we don't do all that many large frames anyway. Just FYI.