Nystrom Performance Single Barbed Banjo Fuel Fitting - Stromberg 97 - Shop

You might also like

Double-end barbed banjo fuel fitting for Stromberg 97 carburetors, precision machined from 304 stainless steel; allows two 5/16-inch fuel hoses to connect in series between multiple carbs on vintage dual-carb setups.

Nystrom Performance

Double Barbed Banjo Fuel Fitting - Stromberg 97

Nystrom Performance

5" Dual stromberg carburetor Linkage

Nystrom Performance

Linkage Arm

Universal ignition switch assembly with two keys and a knurled aluminum mounting nut, suitable for classic cars and hot rods; 3-position (off/ignition/start) switch installs in dash panel and provides reliable vintage-style ignition control.

Nystrom Performance

Universal Ignition Switch

S.C.O.T. Italmeccanica supercharger carb adapter plate machined from 6061 aluminum

Nystrom Performance

S.c.O.T. ITALMECHANICCA ADAPTER

Nystrom Performance

Holley 94 Choke Cable Bracket

(2)

Bob Drake

Stromberg Double End Banjo Fitting

Gear Drive Speed & Custom

Model A intake offset throttle arm

Nystrom Performance

McCulloch Supercharger Emblem

CW Moss Ford Parts

Stromberg 81/97 Banjo Fitting • Single End

Aeroflow Performance 8mm (5/16") Barb, Use 12mm or 7/16" Banjo Bolt to Suit Aeroflow Alloy Barb Banjo - Black AF807-05BLK SR

Stealth Ride

Aeroflow Alloy Barb Banjo - Black AF807-05BLK

Performance Plumbing Components

Dual -06 inlet Banjo Fittings w/ Banjo Bolt & Crush Washers in Show Polished Aluminum

Gear Drive Speed & Custom

2x2 Flathead Intake

Millworks Hot Rod

1/4NPT 90deg elbow - Stromberg 97

Millworks Hot Rod

Kicker assembly- Stromberg 97

Dual barbed banjo fuel fitting for Stromberg 97 featuring a built-in 1/8-inch NPT port on the bolt for a fuel pressure gauge; made of stainless steel and accepts two 5/16-inch fuel hoses on vintage hot rod multi-carb setups.

Nystrom Performance

Double Barbed Banjo Fuel Fitting w/ Fuel Pressure -Stromberg 97

Nystrom Performance

Stromberg 97 Choke Cable Bracket

(1)

304 stainless steel banjo fuel fitting for Stromberg 97 with compression ends and 1/8 NPT fuel pressure gauge port

Nystrom Performance

Double Compression Banjo Fuel Fitting w/ Fuel Pressure - Stromberg 97

Polished finned aluminum carburetor scoop intake mounted on a Stromberg or Holley 2-barrel carburetor; adds classic dragster-style hot rod look and directs airflow into vintage engine carburetors for improved performance.

Nystrom Performance

Finned Carb Scoop

(7)

Set of stainless steel 1/4-inch brake line clamps with bolts, used to secure larger-diameter hard brake lines to chassis frames; ideal for brake plumbing on hot rods, classic trucks, and custom cars.

Nystrom Performance

1/4 Brake Line Mounting Hardware (5 Pack)

Ford Model A and Model B header flange CNC cut from 1018 mild steel with 1 1/2 inch exhaust ports

Nystrom Performance

Model A Header Flange

CW Moss Ford Parts

Stromberg 81/97 Banjo Fitting • Double End

Gear Drive Speed & Custom

2x2 Flathead Intake With 5" Risers

Millworks Hot Rod

Banjo fitting single end - Stromberg 97

Millworks Hot Rod

Banjo fitting double end for fuel gauge - Stromberg 97

40500-1_1

Fuel Systems Technology

6AN-9/16-24 Banjo with Rubber Coated Aluminum Washer

Coore | Performance & Aftermarket

Radium V2 AN ORB Swivel Banjo Fitting, Hose Barb

Gear Drive Speed & Custom

Grace & Co Scoops

LarryB's

LarryB's 12mm Banjo Barb Fitting with 5/16" barb, seals & clamp

(1)

Boost Factory

Vibrant -4AN Male Banjo Fitting 12mm x 1.25 Metric Aluminum + 2 Washers - 11517

Ton's Performance

5

(188)

Stromberg 97 base gasket front view showing dual carburetor openings and Buna-N rubber material

Nystrom Performance

Stromberg 97 Base Gasket

Nystrom Performance

12" to 6" DUAL CARB LINKAGE KIT

(1)

Extended throttle linkage arm for Stromberg 97 and Holley 94 carburetors, offering a longer throw for progressive multi-carb setups; ideal for connecting multiple carburetors in vintage hot rod engines.

Nystrom Performance

Extended Linkage Arm

Split wishbone conversion kit including weld-in bungs and jam nuts (11/16″-18 thread) for early Ford front radius rods, used to add adjustable tie-rod style ends when “splitting” wishbones on traditional hot rod chassis; provides a safe, strong pivot for improved suspension articulation.

Nystrom Performance

Split Wishbone Bung and Jam Nut

McCulloch VS57 supercharger mounting bracket and belt tensioner for Ford flathead V8

Nystrom Performance

McCulloch VS57 Supercharger Flathead Bracket

Bob Drake

Stromberg Banjo Fitting Gaskets

(1)

Gear Drive Speed & Custom

'41 Style air cleaner

(1)

Millworks Hot Rod

Banjo fitting single end for fuel gauge - Stromberg 97

Millworks Hot Rod

Banjo fitting double end for fuel gauge polished - Stromberg 97

Millworks Hot Rod

Stromberg Progressive 3x2 Linkage. 4-7/8in.

Millworks Hot Rod

Stromberg Progressive 3x2 Linkage. 5-1/2in.

Gear Drive Speed & Custom

Model A intake throttle arm

Steady Garage

Zinc Plated 10mm Banjo with 8mm Barb Fitting x 50mm Long

(1)

Millworks Hot Rod

Stromberg Superseat Hose Fitting 9080K

1/4-inch thick phenolic carburetor spacer for two-barrel 3-bolt carburetors (Stromberg 97 and Holley 94), insulates carburetor from heat to improve performance on vintage hot rods.

Nystrom Performance

Two Barrel Phenolic Spacer

Single-end compression banjo fuel fitting for Stromberg 97 carburetor, machined stainless steel, allows connection of 5/16-inch hard fuel line for a clean look.

Nystrom Performance

Single Compression Banjo Fuel Fitting - Stromberg 97

Gear Drive Speed & Custom

2x2 Flathead Intake

Nystrom Performance

Progressive Linkage Collars - 3/16

Ford flathead exhaust header flanges cut from 1018 cold rolled steel with beveled weld surface

Nystrom Performance

Ford Flathead Exhaust Header Flanges

GM 4-71 inlet gasket front view showing rectangular opening and Buna-N rubber material

Nystrom Performance

GM 4-71 Inlet Gasket

Nystrom Performance

S.c.O.T. ITALMECCANICA 3X2 ADAPTER

CW Moss Ford Parts

CW Moss Ford Parts

4.9

(310)

Millworks Hot Rod

Banjo fitting single end polished - Stromberg 97

Millworks Hot Rod

Banjo fitting spacer - Stromberg 97

Harfington

1/4" 6mm ID Hose Barb 12mm Banjo Fitting Fuel Line Connect Adapter for Car 2pcs

Platinum Racing Products

Radium V2 AN ORB Swivel Banjo Fitting, Hose Barb

Gear Drive Speed & Custom

Gear Drive 4x2 Cadillac Intake

Millworks Hot Rod

Ford Nut for 5/16" line (3) - Stromberg 97

Boost Factory

Vibrant -4AN Male Banjo Fitting 10mm x 1.0 Metric Aluminum + 2 Washers - 11512

Stainless steel 3/16-inch brake line clamp securing a hard brake line to a chassis rail; used for routing brake or fuel lines in hot rods and custom car builds, sold in a pack of five.

Nystrom Performance

3/16 Brake Line Mounting Hardware (5 Pack)

Art deco style aluminum ignition coil cover for traditional hot rod engine bay

Nystrom Performance

Ignition Coil Cover

(1)

Gear Drive Speed & Custom

Single Carb Model A Intake Manifold

Direct replacement for 1939-1957 Holley 94

Nystrom Performance

Holley 94 Carburetor Float Replacement

Nystrom Performance

3/16 Double Brake Line Mounting Hardware (3 Pack)

Millworks Hot Rod

Banjo fitting gaskets (10) - Stromberg 97

Holley 94 base gasket front view showing dual carburetor openings and Buna-N rubber material

Nystrom Performance

Holley 94 Base Gasket

Gear Drive Speed & Custom

6x2 Desoto Hemi Intake

Bob Drake

Stromberg Single End Banjo Fitting

CW Moss Ford Parts

Stromberg Banjo Fitting Gaskets

Harfington

2pcs 5/16" 8mm ID Hose Barb 14mm Banjo Fitting Fuel Line Connector for Car Auto

Gear Drive Speed & Custom

4 Barrel Air Cleaners

BenzForce

M12 to 8MM Hose Barb Banjo Fitting

26% off

Drift HQ

Vibrant -6AN Male Banjo Fitting 14mm x 1.5 Metric Aluminum + 2 Washers

Millworks Hot Rod

Vacuum port carburetor base - Stromberg 97

10-pack of replacement banjo fitting gaskets stacked in a coil showing circular washers for banjo fuel fittings

Nystrom Performance

Replacement Banjo Fitting Gaskets (10-Pack)

Double-end compression banjo fuel fitting for Stromberg 97 carburetors, machined stainless steel with two compression ports for 5/16-inch hard fuel lines; feeds dual-carb vintage hot rod setups.

Nystrom Performance

Double Compression Banjo Fuel Fitting - Stromberg 97

Single-end compression banjo fuel fitting for Stromberg 97 carburetor with integrated 1/8-inch NPT fuel pressure port, machined stainless steel fitting for 5/16-inch hard fuel line.

Nystrom Performance

Single Compression Banjo Fuel Fitting w/ Fuel Pressure - Stromberg 97

Nystrom Performance

Stromberg 97 Throttle Return Springs Pair/2

Nystrom Performance

Ford 2" Lowering Shackles

Millworks Hot Rod

Banjo fitting spacer with rod clearance - Stromberg 97

Gear Drive Speed & Custom

2X2 Model A Intake Manifold

Nystrom Performance

Four Barrel Air Cleaner

Millworks Hot Rod

Banjo fitting double end - Stromberg 97

Millworks Hot Rod

1/4NPT hose fitting - Stromberg 97

Aeroflow Performance 8mm (5/16") Barb, Use 12mm or 7/16" Banjo Bolt to Suit Aeroflow Alloy Barb Banjo - Silver AF807-05S SR

Stealth Ride

Aeroflow Alloy Barb Banjo - Silver AF807-05S

Gear Drive Speed & Custom

Y Block Ford Finned Valley Pan With Filler Tube

AAD Performance

Fuel line quick disconnect banjo fitting -8ORB

Millworks Hot Rod

Ford Nut x (3) Chrome - Stromberg 97

Millworks Hot Rod

Rocket clip - Stromberg 97