Nystrom Performance Double Compression Banjo Fuel Fitting - Stromberg 97 - Shop

You might also like

Single-end compression banjo fuel fitting for Stromberg 97 carburetor, machined stainless steel, allows connection of 5/16-inch hard fuel line for a clean look.

Nystrom Performance

Single Compression Banjo Fuel Fitting - Stromberg 97

Nystrom Performance

Stromberg 97 Choke Cable Bracket

(1)

Art deco style aluminum ignition coil cover for traditional hot rod engine bay

Nystrom Performance

Ignition Coil Cover

(1)

Gear Drive Speed & Custom

Single Carb Model A Intake Manifold

Dual barbed banjo fuel fitting for Stromberg 97 featuring a built-in 1/8-inch NPT port on the bolt for a fuel pressure gauge; made of stainless steel and accepts two 5/16-inch fuel hoses on vintage hot rod multi-carb setups.

Nystrom Performance

Double Barbed Banjo Fuel Fitting w/ Fuel Pressure -Stromberg 97

Direct replacement for 1939-1957 Holley 94

Nystrom Performance

Holley 94 Carburetor Float Replacement

Millworks Hot Rod

Banjo fitting double end - Stromberg 97

Holley 94 base gasket front view showing dual carburetor openings and Buna-N rubber material

Nystrom Performance

Holley 94 Base Gasket

Nystrom Performance

McCulloch Supercharger Emblem

Millworks Hot Rod

Banjo fitting spacer with rod clearance - Stromberg 97

AAD Performance

Fuel line quick disconnect banjo fitting -8ORB

Millworks Hot Rod

Stromberg Progressive 3x2 Linkage. 4-7/8in.

Gear Drive Speed & Custom

Flathead Ford Breather Stand

Millworks Hot Rod

Ford Nut (3) - Stromberg 97

DIESELORINGS

#6-024 BANJO BOLT FUEL LINES 94.5-96

304 stainless steel banjo fuel fitting for Stromberg 97 with compression ends and 1/8 NPT fuel pressure gauge port

Nystrom Performance

Double Compression Banjo Fuel Fitting w/ Fuel Pressure - Stromberg 97

Nystrom Performance

12" to 6" DUAL CARB LINKAGE KIT

(1)

Set of stainless steel 1/4-inch brake line clamps with bolts, used to secure larger-diameter hard brake lines to chassis frames; ideal for brake plumbing on hot rods, classic trucks, and custom cars.

Nystrom Performance

1/4 Brake Line Mounting Hardware (5 Pack)

Gear Drive Speed & Custom

2X2 Model A Intake Manifold

1/4-inch thick phenolic carburetor spacer for two-barrel 3-bolt carburetors (Stromberg 97 and Holley 94), insulates carburetor from heat to improve performance on vintage hot rods.

Nystrom Performance

Two Barrel Phenolic Spacer

Nystrom Performance

Stromberg 97 Throttle Return Springs Pair/2

Millworks Hot Rod

Banjo fitting single end - Stromberg 97

Gear Drive Speed & Custom

6x2 Desoto Hemi Intake

Millworks Hot Rod

Banjo fitting double end for fuel gauge - Stromberg 97

CW Moss Ford Parts

Stromberg 81/97 Banjo Fitting • Single End

Millworks Hot Rod

1/4NPT hose fitting - Stromberg 97

DIESELORINGS

#6-025 BANJO BOLT FUEL LINES 1997

Gear Drive Speed & Custom

Gear Drive 4x2 Cadillac Intake

Millworks Hot Rod

1/4NPT 90deg elbow - Stromberg 97

IPGparts

Double Banjo Fitting, 14mm (m14) Banjo to dual 6AN

Ton's Performance

5

(188)

Nystrom Performance

Linkage Arm

Stainless steel 3/16-inch brake line clamp securing a hard brake line to a chassis rail; used for routing brake or fuel lines in hot rods and custom car builds, sold in a pack of five.

Nystrom Performance

3/16 Brake Line Mounting Hardware (5 Pack)

Gear Drive Speed & Custom

2x2 Flathead Intake With 5" Risers

Stromberg 97 base gasket front view showing dual carburetor openings and Buna-N rubber material

Nystrom Performance

Stromberg 97 Base Gasket

S.C.O.T. Italmeccanica supercharger carb adapter plate machined from 6061 aluminum

Nystrom Performance

S.c.O.T. ITALMECHANICCA ADAPTER

Millworks Hot Rod

Banjo fitting spacer - Stromberg 97

Gear Drive Speed & Custom

Model A intake offset throttle arm

Millworks Hot Rod

Banjo fitting double end for fuel gauge polished - Stromberg 97

40500-1_1

Fuel Systems Technology

6AN-9/16-24 Banjo with Rubber Coated Aluminum Washer

Boost Factory

Vibrant -4AN Male Banjo Fitting 12mm x 1.25 Metric Aluminum + 2 Washers - 11517

Gear Drive Speed & Custom

Y Block Ford Finned Valley Pan With Filler Tube

McCulloch VS57 supercharger mounting bracket and belt tensioner for Ford flathead V8

Nystrom Performance

McCulloch VS57 Supercharger Flathead Bracket

Millworks Hot Rod

Ford Nut x (3) Chrome - Stromberg 97

Millworks Hot Rod

Stromberg Stainless fuel line 2x2

Single-end compression banjo fuel fitting for Stromberg 97 carburetor with integrated 1/8-inch NPT fuel pressure port, machined stainless steel fitting for 5/16-inch hard fuel line.

Nystrom Performance

Single Compression Banjo Fuel Fitting w/ Fuel Pressure - Stromberg 97

Nystrom Performance

5" Dual stromberg carburetor Linkage

Nystrom Performance

Ford 2" Lowering Shackles

Gear Drive Speed & Custom

2x2 Flathead Intake

Extended throttle linkage arm for Stromberg 97 and Holley 94 carburetors, offering a longer throw for progressive multi-carb setups; ideal for connecting multiple carburetors in vintage hot rod engines.

Nystrom Performance

Extended Linkage Arm

Nystrom Performance

Holley 94 Choke Cable Bracket

(2)

Millworks Hot Rod

Banjo fitting single end polished - Stromberg 97

CW Moss Ford Parts

CW Moss Ford Parts

4.9

(310)

CW Moss Ford Parts

Stromberg 81/97 Banjo Fitting • Double End

Bob Drake

Stromberg Banjo Fitting Gaskets

(1)

Boost Factory

Vibrant -4AN Male Banjo Fitting 10mm x 1.0 Metric Aluminum + 2 Washers - 11512

Gear Drive Speed & Custom

6x2 Chrysler Hemi Intake

Performance Plumbing Components

Banjo Fittings with Banjo Bolt and Crush Washers in Show Polished Aluminum

(1)

Aeroflow Performance Black Finish Aeroflow Alloy AN Banjo Fitting 5/8" to 3/8 AF163-06BLK SR

Stealth Ride

Aeroflow Alloy AN Banjo Fitting 5/8" to 3/8 AF163-06BLK

Aeroflow Performance 8mm (5/16") Barb, Use 12mm or 7/16" Banjo Bolt to Suit Aeroflow Alloy Barb Banjo - Black AF807-05BLK SR

Stealth Ride

Aeroflow Alloy Barb Banjo - Black AF807-05BLK

Single-end barbed banjo fuel fitting for Stromberg 97 carburetor, accepts a 5/16-inch fuel hose and clamp; provides secure fuel connection for vintage hot rod fuel lines.

Nystrom Performance

Single Barbed Banjo Fuel Fitting - Stromberg 97

(1)

Polished finned aluminum carburetor scoop intake mounted on a Stromberg or Holley 2-barrel carburetor; adds classic dragster-style hot rod look and directs airflow into vintage engine carburetors for improved performance.

Nystrom Performance

Finned Carb Scoop

(7)

Nystrom Performance

3/16 Double Brake Line Mounting Hardware (3 Pack)

GM 4-71 inlet gasket front view showing rectangular opening and Buna-N rubber material

Nystrom Performance

GM 4-71 Inlet Gasket

Ford flathead exhaust header flanges cut from 1018 cold rolled steel with beveled weld surface

Nystrom Performance

Ford Flathead Exhaust Header Flanges

Nystrom Performance

S.c.O.T. ITALMECCANICA 3X2 ADAPTER

Bob Drake

Stromberg Double End Banjo Fitting

Nystrom Performance

Four Barrel Air Cleaner

Millworks Hot Rod

Banjo fitting gaskets (10) - Stromberg 97

CW Moss Ford Parts

Stromberg Banjo Fitting Gaskets

26% off

Drift HQ

Vibrant -6AN Male Banjo Fitting 14mm x 1.5 Metric Aluminum + 2 Washers

Gear Drive Speed & Custom

Flathead Ford Offset Breather

25% off

Drift HQ

Vibrant -6AN Male Banjo Fitting 16mm x 1.5 Metric Aluminum + 2 Washers

Fast Lane Spares

Low Profile AN ORB Banjo Fittings

Coore | Performance & Aftermarket

Radium V2 AN ORB Swivel Banjo Fitting, AN Male / Female Flare

(1)

10-pack of replacement banjo fitting gaskets stacked in a coil showing circular washers for banjo fuel fittings

Nystrom Performance

Replacement Banjo Fitting Gaskets (10-Pack)

Nystrom Performance

Progressive Linkage Collars - 3/16

Gear Drive Speed & Custom

2x2 Flathead Intake

Double-end barbed banjo fuel fitting for Stromberg 97 carburetors, precision machined from 304 stainless steel; allows two 5/16-inch fuel hoses to connect in series between multiple carbs on vintage dual-carb setups.

Nystrom Performance

Double Barbed Banjo Fuel Fitting - Stromberg 97

Split wishbone conversion kit including weld-in bungs and jam nuts (11/16″-18 thread) for early Ford front radius rods, used to add adjustable tie-rod style ends when “splitting” wishbones on traditional hot rod chassis; provides a safe, strong pivot for improved suspension articulation.

Nystrom Performance

Split Wishbone Bung and Jam Nut

Millworks Hot Rod

Banjo fitting single end for fuel gauge - Stromberg 97

Universal ignition switch assembly with two keys and a knurled aluminum mounting nut, suitable for classic cars and hot rods; 3-position (off/ignition/start) switch installs in dash panel and provides reliable vintage-style ignition control.

Nystrom Performance

Universal Ignition Switch

Ford Model A and Model B header flange CNC cut from 1018 mild steel with 1 1/2 inch exhaust ports

Nystrom Performance

Model A Header Flange

Bob Drake

Stromberg Single End Banjo Fitting

Performance Plumbing Components

Dual -06 inlet Banjo Fittings w/ Banjo Bolt & Crush Washers in Show Polished Aluminum

Millworks Hot Rod

Stromberg Progressive 3x2 Linkage. 5-1/2in.

Gear Drive Speed & Custom

'41 Style air cleaner

(1)

Millworks Hot Rod

Ford Nut for 5/16" line (3) - Stromberg 97

Millworks Hot Rod

Stromberg Progressive 2x2 Linkage. 9-5/8in. - Chrome