This is the product description text that will appear here.
Size
Gallon
Color
HP771 / Grey
+3 more
+3 more
Want to Add Reducer? (Highly recommended)
No Reducers
Quantity
1
High solids formula ensures maximum adhesion and gloss retention for high-gloss topcoats
Direct-to-rust capability provides all-in-one corrosion protection with three coats
Rapid sanding in as little as 3 hours above 70°F for faster project turnaround
Non-shrinking, navy formula prevents dye back issues common with other epoxies
Compatible with multiple reducer options for tailored curing and application
description
description
This is the product description text.
4.7
27 ratings
5
4
3
2
1
Shipped fast!
Haven't had a chance to use it yet but the packaging was well done and got here fast, thanks!
C
Customer · September 22, 2026
Good product, but...
I make bicycles and paint what I build. I have used PPG products for 30 years, including DP epoxy primer and most recently KX sandable. PPG has really jacked their prices and they don't sell KX in any size smaller than a gallon - $500.00 plus. I started using Tamco's European clear and liked it so I decided to try your primers. I had some adventure with the HP663. Once I got all the runs worked out I shot the sandable - HP 771 and 770C mixed. I tried shooting it with my primer gun. Painting bicycles you need a small, agile gun. I use HVLP detail guns - a Sata Minijet for paint and a Harbor Freight for primers, and shoot at 20 PSI..
I leaRned my lesson on the white epoxy aND OPENED BOTH CANS TO STIR THEM UP. tHE HARDENER HAD SETTLED INTO A FUNDGe-like substance filling the bottom third of the can. It was work and I got a lot of it on me and on my workbench.
When I tried to shoot it, the sandable primer immediately clogged the gun so only a tiny bit was coming out. I turned the pressure up to 40 PSI and even so it took me 20 minutes to shoot a small frame and fork. I dumped the leftover primer and ran some solvent through the gun - it would barely get through. The coat I laid down was thick and warty-looking. It stayed tacky all into the evening. The next morning it had set up OK. The day after I sanded it. 100-grit regular sandpaper takes it down pretty well and then I finished it off with 200-grit wet-or-dry. It does sand nicely.
This could be an OK product if you included some decent thinner in the kit. As it is, I would say "not ready for prime time."
J
jon · July 30, 2026
Durable stuff. Great as a sealer too.
Happy with the high build primer and easy to apply.
This 1:1 Two-part, high-solids epoxy primer is an ideal coat under high-gloss urethane topcoats to maximize adhesion, improve gloss, and aid in gloss retention. We say improves gloss and aides in gloss as epoxies once topcoated too soon tends to cause dye back issues.
This epoxy will not have