This is the product description text that will appear here.
Quantity
1
Description
Color Reimagined.
Add brilliance to your epoxy projects with Pigmently Resin Dyes. Developed by leading industry professionals, these premium liquid dyes deliver vibrant colors with beautiful translucence unmatched by any other product. Id...
Reviews
4.4
32 ratings
5
4
3
2
1
A challenge but success!
This was my first attempt at an epoxy table. I chose an oak cookie that had been curing for over a year.
Mistake 1 - No moisture meter. The cookie had to high of moisture content which almost killed the project. Major cupping, warping, re-planning and such. Pentacryl helped but should have been applied months prior. Because of this, the table ended up up about 1.25: thick instead of 2"
Mistake 2 - using blue painters tape and metal duct tape to create the dam a the large gap. The epoxy softened the tapes adhesive leading to a mad scramble to save the pour. I was able to staple shims against the tape cams which saved the day
Mistake 3 - Did not realize how much liquid pigment was needed to make a solid color. All good though...I decided to show off the river rock instead of hiding them
mistake 4 - not placing plastic under the pour area. Never will do that again! Almost ruined the table and my workbench. Lol
Inspite of all the mistakes and challenges, I am very pleased with how this turned out!
Notes:
1 - use pentacryl to seal cookies - (all end grain)
2 - sealcoated all with bar top epoxy - I placed the epoxy in hot water to warm it up prior to mixing. That worked well
3 - used deep poor epoxy to fill the large gaps
4- river rocks - great fillers as they do no not have pours. Very little bubbling from them
5- liquid pigment - used probably 20 drops each of black, teal, and blue
6 - finish - sanded to 220 grit and applied Odies Oil - Love the finish!
7 - legs - black walnut fastened with 6 threaded inserts and 1/4 20 bolts.
8- remove all bark!
9 - bowties - Not a fan of traditional bowties so I came up with "fang like" black walnut ones. By the time I finished flattening the cupped tops...only 1/8" was left! They were 3/4" when I started
10- not shown, but I inlayed a large rectangle piece of 1/2" oak under the large cracks on the bottom of the table. This not only helped stabilize the gaps, but also created a "floor" which held the epoxy well.