VLR-6 RESISTOR W/ DUOTAP HARNESS

VLR-6 RESISTOR W/ DUOTAP HARNESS

I was having the common, 'Hyper Flash' issues after switching in and adding LED turn signal bulbs into my 4th Gen. Toyota 4Runner. I previously had installed the Putco resisters which somewhat worked, though the directionals still had a fast blink sequence. I recently replaced the Putco's with VLEDS' VLR-3 Pro resisters hoping to solve the problem. The build quality and craftsmanship of the VLR-3s are better than the Putco's, as well as larger in size. Please note, as stated in the description and installation of the VLR-3s, it is recommended that they be installed using the DuoTap connectors to the factory OEM wires. I did not tap into the OEM wires because where I could gain access to install them was limited. I had upgraded to a higher gauge wiring harness around the rear of the headlights. When attempting to close the DuoTap onto the heavier gauge wire,(14-16 gauge) the clear plastic cover of the DuoTap cracked because of the heavier wire. I was easily able to fix it after squeezing some dielectric grease (supplied) into the DuoTap and wrapping it with electrical tape. After the installation, I did notice a much slower pace in the blinking of the lights. I would definitely recommend the VLR-3's as they corrected the 'Hyper Flash'. -David

2019 f-150 led upgrade

Saw there video on line , I've been looking for a better solution than standard resistors. I decided to try there product for many reasons. I've used traditional resistors in the past with poor results. These resistors are many steps above standard cheap resistors. I'm impressed with the quality of the vlr-6 well thought out well designed . I'm hoping for long life trouble free one time does it job . Highly recommend

Excelent